Prepared by______________________________ Date___________

COMPANY INFORMATION

 Company Name_____________________

Plant Location______________________________

___________________________________________

__________________________________________

Address___________________________________

________________________________________

_________________________________________

Fax________________________________

______________________________________

Telephone____________________________

______________________________________

E-mail______________________________

COMPANY CONTRACTS

Technical _______________________________

Business ____________________________

QA/QC__________________________________

Purchasing __________________________

PRODUCT INFORMATION

 Name/Composition ________________________________________________________________________________

Chemical Formula ________________________________________________________________________________

Usual Application/End Use: ________________________________________________________________________________

Status

Quantity Desired

[ ] Production

______________________LBS.

[ ] Market Sample

By:___________________Date

[ ] Development

PRODUCTION SCHEDULE

__________LBS. PER YEAR AT_________________WEEK INTERVALS ______________MONTH INTERVALS

SPRAY DRYING / PROCESS DESIRED

(Check all required)

[ ] Dry only

[ ] Heating

[ ] Spray chilling

[ ] Control Powder Properties

[ ] Cooling

[ ] Fluidized bed

[ ] Homogeneous Powder from wet batch

[ ] React

[ ] Dehumidified air required

Other____________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

PRIOR SPRAY DRYING EXPERIENCE

Type of Dryer

Atomization

MFGR: __________________________________

Centrifugal

Size:_____________(Dia.)_____________(Height)

_______________________________Disc. Dia.

Capacity:____________________ LBS. Product/Hr.

__________________________________RPM

Heat Source

__Nozzle

___Direct Gas ___Indirect

__Hydraulic

Preference_______________________________

MFGR:_______________________________

Size: ___________________________________

Operating Temperatures

Pressure: ___________________________________

__Two Fluid (Air Atomizing)

MFGR: ___________________________________

Air Flow

Size: ___________________________________

___Cocurrent

___Countercurrent

Air/Feed Pressure: _____________________________________

FEED DATA

__Newtonian

__Suspension

__Dilatant

__Emulsion

__Thixotropic

__Gel

__Rheoplastic

__Other __________________________________

Does Rheology change markedly

_________________________________________

with concentration, heating, pH

_________________________________________

Please comment _________________________

_________________________________________

____________________________________

pH

______at_____

Viscosity (Brookfield)

Average particle size in feed

_____________________________________microns

Filter size to remove foreign matter

________________________________microns/mesh

Concentration (% solids wgt.)

_______min._______avg._______max.

Specific Gravity (1.0 = water)

________________________________________g/cc

Specific Heat

Volatiles other than water (concentration ppm)

 __________________________________________

Does material form stable foam

__Yes

__No

Can anti foam agent be used

__Yes

__No

Is the material abrasive/corrosive

__Yes

__No

__ Corrosive

__Abrasive

If yes, please comment

_____________________________________________

MATERIAL HANDLING

How will feed be delivered

[ ] Bags.

[ ] Bulk Bags

 [ ] Drums

[ ] Totes

[ ] Tanker

[ ] WGT

[ ] LBS

Desired product package

[ ] Bags.

[ ] Bulk Bags

 [ ] Drums

[ ] Totes

[ ] Tanker

[ ] WGT

[ ] LBS